Symons cone crusher is one of the most popular crushing equipment, and there are many factors that affect its final output and quality. So, what should we do to effectively improve the production capacity of Symons cone crusher machines?
1. Ensure uniform feeding
When using a Symons cone crusher equipment, it is recommended to use supporting feeding control equipment to ensure that the material can be fed evenly and continuously along the crushing cavity. To prevent the uneven feeding of large-sized stones on one side and small-sized stones on the other side. This will reduce the production efficiency of the Symons cone crusher, so it is very important to ensure that the stones are evenly mixed.
2. Ensure the appropriate speed of crusher
The speed of the high performance Symons cone crusher mainly depends on the motor. A motor with a large power can produce a higher speed and provide more power, which can greatly increase the output. In addition, the high speed and the increase of the number of crushing materials can make the crushed materials finer. Therefore, the speed can be appropriately increased without affecting the crushing effect and the normal operation of the Symons cone crusher.
3. Ensure "full cavity" operation
The mineral processing Symons cone crusher with half cavity operation is not ideal in terms of gradation and grain shape of the products. The "full cavity" operation is to meet the production requirements and avoid the phenomenon that the product particles are too coarse. The particle size of the product is uniform, which can make the material meet the requirements of the finished product by one crushing, avoid the secondary crushing, and improve the production efficiency to a certain extent.
4. The properties of materials meet the equipment requirements
The properties of crushed materials, such as hardness, humidity and composition of materials, will affect the production efficiency of Symons cone crusher aggregate equipment. The hardness and humidity of materials are higher, the crushing strength and difficulty increase, and the production efficiency will decrease. When the content of fine materials less than the discharge port of the crusher exceeds 10% of the crusher's production capacity, the material may stick to the inner wall of the crushing cavity or on the movable cone and the fixed cone, which is easy to block. Therefore, the properties of materials must be consistent with the requirements of Symons cone crusher operation to improve the production efficiency.
5. Reasonable use of configuration to improve production efficiency
Reasonable use of buffer bin / hopper, variable speed feeding device (conveyor belt, plate vibration feeder) can easily improve the production of Symons cone crusher by 10%.
Facing the needs of the majority of users, the Nile machinery team with rich experience is constantly innovating and striving to develop the Symons cone crusher with low cost and high output.
