Home > Products > Crushing Equipment >
Jaw crusher




Jaw crusher

  • Max feed size(mm) : 120-1020
  • Capacity (t/h) : 1-800
  • The scope of application is wide. Jaw crusher is widely used in mine industry, smelting, building materials, roads, railways, water industry, chemical industry, etc. and is especially suitbale for a stationary crushing production line and a mobile crushing station.
Product features: high crushing ratio, high efficiency, large amount of processing, low operating costs, convenient adjustment, economical use.
There are important improvements in the structural of components, regulation and so on. It’s different from the traditional jaw crusher.
 
The scope of application is wide. This jaw crusher is widely used in mine industry, smelting, building materials, roads, railways, water industry, chemical industry, etc. and is especially suitable for a stationary crushing production line and a mobile crushing station.

Benefits

  •  

    High crushing efficiency
    Through theThrough the optimization of the crushing cavity structure and the mobile jaw’s motion trajectory parameter, to have a higher crushing efficiency at same power consumption.

  •  

    Good stability
    Through optimization of this equipment’s integral design and the balance part, to obtain a large improvement in the oscillation. Comparing with jaw crushers of the same specification, to have a higher stability.

  •  

    simple operation, convenient maintenance
    The advanced edge guard plate bolt fixing system makes this type of model faster when replacing the edge guard plate; a reasonable machine structure makes this type of model more convenient when adjusting the size of the discharge opening and when replacing the elbow, which can effectively shorten the operation. Maintenance time.

  •  

    low maintenance costs
    High wear-resistant plates and protection plates have a longer service life and save the cost of post-maintenance maintenance Widely used for crushing process of various metal ores and non-metal ores


Technical Data

Model Feeding
Opening
Size
(mm)
Max 
feed 
size
(мм)
Discharging
 range
(мм)
Capacity        
(т / h)
Power
(кw)
Weight 
(t)
Dimensions 
(mm) 
(LxWxH)       
PE-150×250 150×250 120 10-40 1-4 5.5 1.1 880×750×940
PE-150×750 150×750 120 10-40 10-20 15 2.2 1260×1400×900
PE-250×400 250×400 210 20-60 5-20 15 3 1300×1090×1270
PE-400×600 400×600 340 40-100 16-60 30 7 1730×1730×1630
PE-500×750 500×750 425 50-100 40-110 55 12 1980×2080×1870
PE-600×900 600×900 500 65-160 90-180 55 17 2190×2206×2300
PE-750×1060 750×1060 630 80-140 110-320 110 29 2660×2430×2800
PE-800×1060 800×1060 640 80-150 130-330 110 29.8 2710×2430×2800
PE-900×1060 900×1060 685 80-150 230-390 110 33 2870×2420×2940
PE-900×1200 900×1200 750 95-165 220-450 110-132 58 3380×2870×3330
PE-1000×1200 1000×1200 850 195-265 315-500 110-160 69 3480×2876×3330
PE-1200×1500 1200×1500 1020 150-300 400-800 160-220 100.9 4200×3300×3500
PEX250×750 250×750 200 15-60 13-35 30 6.5 1380×1750×1540
PEX250×1000 250×1000 200 15-60 16-52 37 7 1560×1950×1390
PEX250×1200 250×1200 200 15-60 20-60 45 9.7 2140×2096×1500
PEX300×1300 300×1300 240 20-90 20-100 55 15.6 2720×2210×1600

Request For Quotation

You can get the price list and we will contact you within one working day.

Project Of Company