Part 1
Type:
Jaw crusher is often used for primary crusher and secondary crusher
Use:
which can be used to crush all materials with compressive strength below 320Mpa, such as basalt, granite, marble, limestone and so on
Model:
Big, Middle,Small (Feeding width)
Big>600mm；Middle300-600mm；Small<300mm
Part 2
power source: motor drive
First the motor feeds power to the skin through a triangular belt
Second the pulley, the pulley turns the eccentric shaft drive the jaw body to swing back and forth.
When the moving jaw plate moves close to the fixed jaw plate, it is broken
The volume of the cavity decreases, and the material in the broken cavity is crushed or cleaved
When the jaw plate moves, the volume of crushing cavity becomes larger.
Small pieces of broken material are discharged from the crushing chamber
The feed orifice is discharged, which makes a continuous circular motion,
Realize crushing operation.
General working process
Motor →Belt pulley→movable jaw→fixed jaw (again and again)
Part 3
Main part of the Jaw crusher: rack section; Eccentric shaft rotating part; Working part of crushing chamber; safety device; Discharge port adjustment device
Part 4
PE jaw crusher advantages:High performance;
good stability; high reliability; Easy to operate and maintain; wide application
