The main working environment of jaw crusher is outside , it is harsh.
How can we decrease the bad affect from harsh outdoor environment?
In the outdoor environment, it is susceptible to seasonal temperature. Overheating in summer will accelerate the consumption of wearing parts; and the winter is too cold, the steel of jaw crusher will become more fragile.
In addition to cold processing in summer, wearing parts use the wear-resistant materials. The important thing is that control the temperature of the wearing parts, and ensure them in good lubrication. Because all power consumed by the friction will be converted into heat and the temperature of the parts will increase when the crusher runs at high speed.
If the lubrication works properly, the friction surface will absorb the heat and dissipate under the action of the lubricant, then reduce the surface temperature. Finally, it will reduce the maintenance rate of the jaw crusher, bring better profits.
At present, most of the stones used to highways are broken by jaw crushers. In order to avoid damaging fasteners and other components, please adjust or replace the hammer in time. When replacing the mixing tank, open the back cover, remove the cotter pin, slotted nut and bolt used to fix the countersunk hole, and then replace it.
The jaw crusher should check the bearing temperature in time for normal operation.
If temperature is abnormal, Maybe grease is too much, insufficient or dirty, Maybe bearing is damaged; Please check the amount of grease, replace the grease or bearings in time.
